How to Fix your Diana Mini for GOOD. No More Film Advance Problems! // Cómo arreglar tu diana Mini. No más problemas de avance!

6

Recently I had film advance problems regarding my Diana Mini. The advance wheel was very hard and it used to break the film. So I checked the Tutorial by gnarlyleech and I started to dismantle my Diana Mini to try to fix it, and I found another solution for this problem.

I don’t want to dismantle again my camera, only for taking pictures of the proccess in order to make a Tutorial; therefore I need you to read that Tutorial first. We will refer to the pictures of the gnarlyleech’s Tutorial (the capital letters in brackets refers to those images).

I didn’t find any problem with the slot (A) and the lever (B). But the advance wheel was very hard to move, so I tried to understand what parts and mechanisms were involved with the wheel movement. I discovered how the Big Fat Spring (B) was related with the wheel function.

By accident, while I was trying to understand the mechanisms, I found the spring a little bit loosened in one side. I was scared about this, but after the first impression I thought that maybe it would be good for the wheel problem. I checked it and I was right, the problem was solved and the wheel advance was soft. I charged the camera with film and it comes to work!

So, you only have to loosen a little bit the spring to resolve the problem. Maybe it’s a risky tip, but perhaps it’s less risky than cutting plastic pieces with a cutter, isn’t it?

Credits: toyam

Hace poco he tenido problemas de avance con mi Diana Mini. La ruedecita de avance estaba muy dura y solía romperme la película. Así que le eché un vistazo este Tutorial de gnarlyleech y empecé a desmontar mi Diana Mini para intentar arreglarla y encontré otra solución al problema.

Había pensado en hacer otro tutorial pero no me atrevo a volver a abrirla ahora que funciona, solamente para hacer fotos del proceso, porque las del artículo me valen. Así que si os interesa esta nueva solución, necesitáis leer el Tutorial.

En mi caso no veía ningún problema en el funcionamiento de la Palanca B y la Ranura A. Pero la ruedecita de avance del negativo llegaba a ponerse realmente dura de pasar y me rompía el negativo. Trasteando para intentar descubrir cómo funcionaba la ruedecita y qué mecanismos y piezas estaban involucrados descubrí que el Muelle B (Grande y Gordo) era el encargado de cargar el disparador con el movimiento de la ruedecita de avance.

Pues bien, trasteando y trasteando… ¡Oh! ¡Horror! De pronto me aparece el muelle B con uno de sus extremos ligeramente estirado o vencido. Al principio me lamento (“¡Me estoy cargando mi Diana Mini!”) Pero después pienso que al estar algo vencido debería haber menos tensión en el muelle y el avance de la ruedecita debería ser más suave. Lo compruebo y en efecto así es, ya no tiene ese punto de dureza que desgarraba el negativo. Sorprendido la monto, la cargo con negativo y vuelve a funcionar con extrema suavidad.

Por lo tanto, para arreglar el problema, sólo tienes que destensar un poquito el muelle. Es un truco con riesgo… pero menos arriesgado que cortar trozos de plástico con un cutter, ¿no os parece?

written by alehopgm on 2011-03-09

6 Comments

  1. alehopgm
    alehopgm ·

    I want to thank to @toyam her help writing in English this post.

  2. toyam
    toyam ·

    De nada, guapo. Esperemos que se entienda... que español-inglés no es lo mío!

  3. isabel_mebarak
    isabel_mebarak ·

    ¡Se entiende, se entiende! :D :D

  4. alehopgm
    alehopgm ·

    ¿Pero lo entiendes en español o en inglés @isabel_mebarak?

  5. beni
    beni ·

    eyyyyy, y las fotos del proceso? Tío enhorabuena, hace falta valor y ahora ya lo sabes. IFIX RULES!

  6. alehopgm
    alehopgm ·

    No fue exactamente un proceso, sino un accidente. Cerre la camara para comprobar si funcionaba mejor despues del accidente y asi fue, y ahora no me atrevo a abrirla para hacer fotos, con los 20 piggies del tutorial no cubro cargarme mi pequena Diana Mini... Pero no iba a dejar mi experiencia sin compartir por no tener fotos del proceso... no?

    PD. Perdon por la falta de tildes y enhes, que estoy en el ordenador del college.