What is pushing or pulling a film?

As a film photographer, you might hear or read the terms “pushing” or “pulling” a film. The concept can sound confusing but it’s actually very simple. Let’s break it down.

ISO 400 film pushed 2 stops to 1600 © grazie

Every film comes with a “box speed” ISO rating. This is the speed at which you should shoot the film in order to achieve the best results.

Pushing film is when you shoot the film at a higher rating than its “correct” box speed. e.g. at ISO 800 instead of a box speed of 400. When you push film you are giving the film less light than it needs while your shutter reacts faster, allowing you to keep shooting with your camera handheld. Essentially you are underexposing the film. But you make up for this by altering the development time. This allows you to bring back the details you would have lost from underexposure.

Pushing film requires a longer development time than normal. If you’re getting your film developed at a lab simply tell them how you’d like your film pushed / pulled (e.g pushed +1 stop.) They will adjust the development time accordingly.

Film is pushed (and pulled) in stops. Pushing one stop means doubling the speed of the film. So a 400 ISO film pushed by one stop (+1) would then be rated at 800 ISO. Pushed by two stops (+2) means it would be rated at 1600. Logically then, a 400 ISO film pulled by one stop (-1) would be rated at 200 ISO.

Photo by @clownshoes ISO 400 pulled to ISO 100

As you have probably guessed, pulling film is simply the opposite of pushing. When pulling film you give the film a lower rating (e.g. ISO 200 instead of box speed 400.) This will overexpose your film as you are giving it more light than necessary, though on a shorter period of time. Again you compensate for this by developing it for a shorter amount of time.

Remember, if you only alter the speed at which you rate the film, all you are doing is overexposing or underexposing. The real pushing and pulling magic comes during development.

But why push or pull film?

The main reason why you might want to push or pull film is that you find yourself in a situation where the film you have at hand is not appropriate for the light. If you’re in a low light situation and the only film you have is ISO 400 then you may want to rate it at 800 or 1600 ISO in order to still be able to take some pictures.

The opposite problem of too much light does not normally pose the same issues. This is because most color negative and B&W film handles overexposure very well so there is little harm in the film receiving too much light. For this reason pulling film is not as common a practice as pushing film, however it may help decrease contrasts and bring more information in the shadows.

Some photographers also like the unique look that can only be achieved by pushing or pulling film. Pushing film typically results in higher contrast and more grain, while pulling film will significantly reduce contrast in the final images. It is a common practice to push B&W film, but it’s much more unusual to do so with color negative film because of the increase in color saturation. However both B&W and color negative film can be pushed and pulled with excellent results.

Experiment with this technique and see which effects are best for you!

Anything missing?

Can’t find an answer to your question? Or do you have some useful advice to add to one of our courses? We want to build the world’s largest analogue learning space, so please send any further requests or information to school@lomography.com and we’ll take a look!

More Courses

  • What are the different types of film cameras?

    From a SLR, to TLR, to rangefinder or point & shoot cameras – find out how these different types of cameras operate.

  • What is the sunny16 rule?

    What is the sunny16 rule?

    The Sunny 16 Rule is a way to meter for correct exposure during daylight without using the camera’s meter. It is great for photographers who don’t want to get slowed down by metering for every shot or rely too much on their camera’s in-built light meter.

  • What does it mean to overexpose vs underexpose a photo?

    What does it mean to overexpose vs underexpose a photo?

    Put simply, an overexposed image is one that is brighter than the reality of the scene you’re trying to photograph, while an underexposed image is darker than reality. Overexposure generally means you are giving your film too much light, and with underexposure you have the opposite problem of not enough light.

  • What is parallax error and how can I avoid it?

    What is parallax error and how can I avoid it?

    Parallax error, also known as a viewfinder error, is the shift in the apparent position of your subject due to the difference between what your lens sees and what your viewfinder shows. This can affect a photograph’s composition, framing and depth, but there are easy steps we can take to minimise it from happening.

  • Do I have to load film in my camera in the dark?

    There’s no need to load film in the dark but going under the shade or subdued lighting are ideal conditions when loading film.

  • What is the difference between a full-frame and half-frame camera?

    Full-frame film cameras create an image across the entire 36 mm by 24 mm frame. Whereas half-frame cameras can fit two images onto one frame and each image measures 18 mm by 24 mm.

  • How many photos can you take on a 35 mm film?

    A standard roll of 35 mm film allows you to take 36 photos. However certain film stocks only allow 24 photos to be taken. The number of exposures is indicated on the outside of the box of film.

  • What is the difference between analogue and digital?

    Analogue and digital formats are both ways of storing information. In analogue technology, waves or signals are stored in their original form (such as vinyl where grooves are etched in order to create sound waves on the disk itself.) However, in digital technology, waves or signals are converted into numbers and stored as code on a digital device such as a hard drive, memory card or computer.

  • What does bokeh mean?

    What does bokeh mean?

    Coming from the Japanese word “boke-aji” which means the quality of blur, bokeh describes the quality of a photo’s “blurry“ and out-of-focus portion.